The adjusted optical properties for Galileo/BeiDou-2/QZS-1 satellites and initial results on BeiDou-3e and QZS-2 satellites

Solar Radiation Pressure (SRP) is the dominant non-gravitational perturbation for GNSS (Global Navigation Satellite System) satellites. In the absence of precise surface models, the Empirical CODE Orbit Models (ECOM, ECOM2) are widely used in GNSS satellite orbit determination. Based on previous studies, the use of an a priori box-wing model enhances the ECOM model, especially if the spacecraft is a stretched body satellite. However, so far not all the GNSS system providers have published their metadata. To ensure a precise use of the a priori box-wing model, we estimate the optical parameters of all the Galileo, BeiDou-2, and QZS-1 (Quasi Zenith Satellite System) satellites based on the physical processes from SRP to acceleration. Validation using orbit prediction proves that the adjusted parameters of Galileo and QZS-1 satellites exhibit almost the same performance as the corresponding published and “best guess” values. Whereas, the estimated parameters of BeiDou-2 satellites demonstrate an improvement of more than 60% over the initial “guess” values. The resulting optical parameters of all the satellites are introduced into an a priori box-wing model, which is jointly used with ECOM and ECOM2 model in the orbit determination. Results show that the pure ECOM2 model exhibits better performance than the pure ECOM model for Galileo, BeiDou-2 GEO and QZS-1 orbits. Combined with the a priori box-wing model the ECOM model (ECOM+BW) results in the best Galileo, BeiDou-2 GEO and QZS-1 orbits. The standard deviation (STD) of satellite laser ranging residuals reduce by about 20% and 5% with respect to the pure ECOM2 model for Galileo and BeiDou-2 GEO orbits, while the reductions are about 40% and 60% for QZS-1 orbits in yaw-steering and orbit-normal mode respectively. BeiDou-2 IGSO and MEO satellite orbits do not benefit much from the a priori box-wing model. In summary, we suggest setting up a unified SRP model of ECOM+BW for Galileo, QZS-1, and BeiDou-2 orbits based on the adjusted metadata. In addition, we estimate the optical parameters of BeiDou-3e and QZS-2 satellites using a limited number of tracking stations. Results regarding the unified SRP model indicate the same advantages, the STD of satellite laser ranging residuals reduces by about 30% and 20% for QZS-2 and BeiDou-3e orbits respectively over orbit products without a priori model. The estimation procedure is effective and easy to apply to the new emerging satellites in the future.     

Multi-objective Optimization of Differential Steering System of Electric Vehicle with Motorized Wheels

A differential steering system is presented for electric vehicle with motorized wheels and a dynamic model of three-freedom car is built. Based on these models, the quantitative expressions of the road feel, sensitivity, and operation stability of the steering are derived. Then, according to the features of multi-constrained optimization of multi-objective function, a multi-island genetic algorithm （MIGA） is designed. Taking the road feel and the sensi- tivity of the steering as optimization objectives and the operation stability of the steering as a constraint, the system parameters are optimized. The simulation results show that the system optimized with MIGA can improve the steering road feel, and guarantee the operation stability and steering sensibility.     

飞机结构初步设计优化中的损伤容限优化方法研究

本文提出并研究了一种在飞机初步设计阶段考虑损伤容限要求优化设计的方法.首先,通过许用应力形式来体现并表征损伤容限设计要求,作为一类新的设计约束,用于初步设计阶段的结构优化设计.然后,通过Global/local分析,在整体优化设计中考虑局部疲劳需求;根据疲劳寿命要求,用裂纹扩展分析程序AFGROW确定了一个新的强度准则...     

带探针装置的倾斜卧式椭直圆筒罐罐容表函数的计算

针对带探针装置的倾斜卧式椭直圆筒罐罐容表函数(即罐内储油量与探针油位高度对应的函数关系)的理论计算问题,首先采用"冰冻"思维和相对运动等效地把倾斜卧式的情形转化为水平卧式的情形,然后根据液面与关键液面的不同位置关系采取了不同的计算方法,最后分段地得到了罐容表函数的一般表达式。     

多层波纹管焊接接头设计与焊接工艺研究

介绍了多层波纹管焊接接头结构形式,分析了多层波纹管的焊接工艺性及工艺难点。采用滚焊+熔焊的焊接工艺,解决了焊接后焊缝气孔缺陷、熔深浅的问题。改进后的批产试验件焊缝一次交检全部达到I级标准,并通过地面单元试验考核。     

基于小波变换和支持向量机的开关电流电路故障诊断新方法

针对开关电流(Switched current,SI)电路的故障诊断和定位问题，为进一步提高故障诊断准 确率，提出了基于小波变换和粒子群优化(Particle swarm optimization，PSO)支持向量机 (Support vector machine，SVM)的开关电流电路故障诊断新方法。该方法首先对节点电流 信号进行蒙特卡罗分析，然后通过小波分解计算分形维数，再利用核主元分析（Kernel pri ncipal component analysis，KPCA）降低特征值维数，实现最优故障特征的提取。最后通 过PSO SVM完成对各种故障模式的分类。对六阶切比雪夫低通滤波器进行了仿真实验验证， 获取了较高的故障诊断准确率，与其他方法进行比较，实验结果显示了本文方法的优越性。     

基于多核融合的目标大面积遮挡处理方法

提出了一种基于多核融合的目标遮挡处理方法,用于提高大面积遮挡情况下视觉目标跟踪算法的鲁棒性和准确性.与现有基于单个对称核加权直方图的mean shift跟踪算法不同,该方法以目标区域内的多个非中心位置为核函数中心,构建多个非对称核加权直方图.由于这些直方图对目标的不同区域赋予了不同的权重,使得在遮挡发生时总存在一些直方图受影响较小.依据各个直方图分别进行mean shift迭代获得一组目标位置估计后,利用D-S证据理论融合判定最终的目标位置.实验结果表明,该方法在目标被大面积遮挡时仍能够获得准确的跟踪.     

基于四元数方法的GPS航姿解算

应用ＧＰＳ载波相位双差测量来确定载体的航向和姿态需要解决两个主要问题：模糊度的确定和航姿算法。本文提出了ＧＰＳ航姿解算的四元数方法，直接利用ＧＰＳ载波相位双差 算姿态四元数，从而保证了姿态矩阵的正交性能。     

应用约束条件快速解算整周模糊度

ＧＰＳ载波相位测量用于解算载体的航向和姿态时必需解决的问题之一就是整周模糊度的确定。近年来提出了多种模糊度的解算法方法，但对ＧＰＳ航姿系统来说，若能利用固有的约束条件则会使模糊度问题变得简单且快速有效。在详细分析了几种约束条件的基础上，文中探讨了如何合理 这些约束条件来减小模糊度的搜索范围，以加快模糊度的解算速度，并对检验方法作了改进。通过仿真结果对文中方法进行了检验。     

TiAl/IN718合金过渡液相连接

采用过渡液相TLP(Transient Liquid Phase)连接技术,以金属Ti,Cu,Ni箔构成复合焊料连接TiAl和IN718合金.研究了保温时间对接头界面结构的影响.实验结果表明:采用Ti-Cu,Ti-Ni复合焊料可以制备无缺陷的接头,但2种焊料形成液相的过程和机理不同.由于在等温凝固过程中,从IN718合金中扩散过来的合金元素可在焊缝区聚集,从而在接头中形成亚层结构.通过对接头焊缝区的组织分析和硬度测试表明,在实验条件下Ti-Ni焊料的等温凝固过程持续时间比Ti-Cu的短.